Laser Hair Removal

LINLINE company developed a unique method of laser hair removal using a train of nanosecond laser pulses.
A medical program, installed into the built-in computer of the Multiline™ laser complex contains a whole range of settings of parameters of neodymium Nd:YAP/Q-sw laser radiation, necessary for an effective procedure of hair removal when taking the treated area, hair colour and skin’s pigmentation level into account.
The method is protected by national and international patents.

Advantages of the LINLINE™ method

  • Complete removal of unwanted hair.
  • Effectiveness of the method does not depend on skin phototype.
  • There are no seasonal restrictions on the procedure.
  • No need for anesthesia.
  • There is no risk of burns, pigmentation and scarring of the skin.

  Tretment results Before-After

 

About the mechanisms of laser hair removal.

Laser removal of the unwanted hair is one of the most popular cosmetic procedures. Speed of hair removal, minor pain and continuance of the effect the lack of hair growth make laser hair removal a very popular procedure. Thit is why almost all manufacturers of laser technologies try to offer devices for this procedure.

The mechanism of laser and photo hair removal based on the effect of selective photothermolysis, which lies in the fact that melanin of hair absorbs the energy of laser radiation, converts it into heat and transfers it to the structure of hair, causing coagulation. There are a few problems lying in the way of this mechanism.
The main problem is a patient’s skin pigmentation level because melanin is a main chromophore through which can be realised the hair removal mechanism; this exists not only in hair but also in skin. With that, the probability of radiation absorption by melanin of skin does not differ from that of absorption by hair. Moreover, if we consider the fact that the hair has a very small size compared to the laser spot on the skin, it becomes clear that the bulk of the laser radiation will be absorbed not by melanin of the hair but by melanin of the skin.A consequence of this is the skin heating up to coagulation.

The first laser epilators were made on the basis of a ruby laser. Efficiency of absorption of ruby laser radiation (694 nm) is significantly higher efficiency of absorption of radiation than other lasers operating in the “transparency window” of the skin. However, little by little, people started to refuse these lasers because a high coefficient of absorption by melanin has a reverse side. Radiation absorbs more efficiently by melanin of epidermis which leads to its overheating and shielding hair from the influence.
Later, for the purpose of hair removal people started to use neodymium, diode and alexandrite lasers. Efficiency of absorption of these lasers is lower than that of ruby, so to provide transferring to the hair the dose of energy, sufficient for its coagulation it’s necessary to significantly increase laser pulse energy. The result, as is clear from the above, is increased skin heating. If we also take into account the fact that in case of less effective absorption of this radiation by melanin, depth of its penetration into skin increases, we can see that in this case excessive heating of the surrounding tissues can with a high probability lead to scarring.
Using of additional cooling devices to ensure the “comfort” procedure, not only does not solve this problem, but on the contrary, increases the risk of scarring, because you can only cool the skin surface, and scarring occurs when overheating deep layers of the dermis.

VIDEO: Process of hair removal using a classical long-pulse laser (wavelength from 694nm to 1.08µm, pulses duration from several to tens of milliseconds).

When developing a new method of laser hair removal, we aimed to achieve a high level of hair removal with minimal injury to surrounding tissue.
Special type of generation realised in Multiline™ epilator is a pack of nanosecond pulses with carefully selected parameters: total duration of a train, duration and energy value of every pulse and also an interval between the pulses. Parameters of the wave packet are selected so that during its influence skin temperature varies near its normal value while temperature of hair stepwise increases up to coagulation temperature. Also, absorption of nanosecond pulses by melanin-containing structures leads to appearance of acoustic waves, which destroy the hair but aren’t powerful enough to traumatise surrounding tissues. So, using a combination of thermal and mechanical influence on the hair at relatively low density, we can get a brilliant effect of hair removal without risk of traumatising surrounding tissues.

VIDEO:Process of hair removal using LINLINE™ method with nanosecond pulses train.;.

Flickr

  • 7
  • 4
  • 5
  • 6
  • 3
  • 2

Contact Us

LINLINE Medical Systems
21 Avenue des Ternes, 75017 Paris - France
Antonovskaya Ulitsa 28A
Minsk, 220088, Belarus
Mon − Fri 9am − 5pm
Sat − Sun Closed
Sales Department
+33 688 972 873, +375 17 28 52 976
+375 25 549 99 48
Customer Service
+375 17 293 08 33